Plataforma

Meusburger 3-Achs-Mega-Tele-Plateau-Sattelauflieger-nachlaufgelenkt

You receive a current & complete inspection and function report with every used trailer.

Chassis:
* Welded steel frame construction - lightweight design
* Frame neck approx. 110 mm
* Outer frame closed to the outside
* Vehicle with extendable central frame, 7,000 mm telescopic (permissible with self-steering axle max. 4,000 mm), each 500 mm pneumatically lockable
* Saddle plate 8 mm with exchangeable 2" kingpin
* Frame reinforcement for point load 25 tons over 3 m when retracted
* Load-bearing outer frame
* Beveled rear 500 x 100 mm
* Front installation dimension matched to the front corner dimension 2,040 mm
* Underride guard = extended end plate
* Suspension rail at the rear of the end panel
* Rear drop lift supports

Support winches:
* Mechanical 24-ton support winches with 1-side operation and thrust compensation

Axles:
* BPW air-spring axles, 10 tons axle load each, bellows diameter 360 mm
* S-cam brake 300/200 mm, asbestos-free brake linings
* Automatic slack adjuster
* Wabco SmartBoard with lifting and lowering device with total lift approx. 200 mm
* 3rd axle as friction-steered trailing axle with electrical and mechanical lock

Wheels and tires:
* 13 steel disc wheels, 10-hole, with offset, centered.
* 13 235/75 R17.5 tubeless tires.

Mudguards:
* Sheet metal mudguards with mud flaps

Brake system:
* Two-wire brake with EBS
* EBS (WABCO 4S3M)
* Aluminum air reservoir
* Spring-applied parking brake
* Yellow/red air connection

Electrical equipment:
* According to motor vehicle law
* 24 Volt. 2x 7-pin sockets and 1x 15-pin socket
* 2 x 7-chamber tail lights in the cover plate
* Side marker lights

Floor:
* 50 mm hardwood floor, protruding approx. 5mm over frame profiles

Front wall:
Nodpfjqvmnhsx Aafocl
* 25 mm aluminum hollow profiles, 2,000 mm high, screwed on, two supports
* 2 eyelets for tensioning the front wall in accordance with DIN EN 12642 (5,000daN)

Paintwork:
* Steel granulate cleaning, spray galvanizing Chassis including telescopic primer
* Chassis and wheel hubs in MB 7350 nova gray
* Outer frame and front wall in MB 7350 nova gray
* Wheel rims factory silver.
* Plastic parts unpainted black.
* Reflector tape on the sides and rear in yellow

Accessories:
* Side bumpers
* 4 wheel chocks
* 1 spare wheel holder on the side
* Long license plate holder in the underride guard
* 2 ECE plates
* 3 pairs of standard lashing rings laterally recessed in the outer frame mounted on the front plateau, tensile force 4 tons each
* 9 pairs of heavy-duty lashing rings (foldable) with a tensile force of 8 tons each
1 pair mounted at the end of the front plateau and 8 pairs mounted in the rear plateau
* 6 pairs of mushrooms on the side of the outer frame with web thickness 24 mm for lashing
* 8 pairs of stanchion pockets on the side of the outer frame for 100x50mm stanchions
* 3 cross rows of stanchion pockets for 100x50 mm stanchions (1x in the kingpin area max. 100 mm deep, 1x in front of the axle unit and 1x behind the axle unit - version 100 mm lengthwise 50 mm crosswise)
* Storage compartment for stanchions in front of the front wall (= stanchion pockets in the floor)
* Extendable warning signs incl. position lights, at the front on the fifth-wheel support winches and at the rear in front of the end plate, infinitely extendable up to a loading width of 4,500 mm, with 3-pin socket and removable helix
* 1 PVC toolbox 630x400x450 mm
* Container locks for 2 x 20 ft and 1 x 40 ft containers

El anuncio se tradujo automáticamente y se pueden haber producido errores de traducción.