Cargador bajoNOOTEBOOM
OSDS-Semi-Tieflader
Cargador bajo
NOOTEBOOM
OSDS-Semi-Tieflader
Precio fijo IVA no incluído
77.500 €
(92.225 € bruto)
Año de fabricación
2022
Estado
Nuevo
Ubicación
Heilbronn 

Mostrar imágenes
Mostrar mapa
DATOS BÁSICOS
- Designación:
- Cargador bajo
- Fabricante:
- NOOTEBOOM
- Modelo:
- OSDS-Semi-Tieflader
- Año de fabricación:
- 2022
- Estado:
- nuevo
PRECIO Y UBICACIÓN
Precio fijo IVA no incluído
77.500 €
(92.225 € bruto)
- Ubicación del vendedor:
- Alexander-Baumann-Str. 70, 74078 Heilbronn, Alemania
Llamar
DETALLES TÉCNICOS
- Configuración de ejes:
- 3 ejes
- Longitud del espacio de carga:
- 9.250 mm
- Anchura del espacio de carga:
- 2.520 mm
- Ancho total:
- 2.520 mm
- Equipamiento:
- ABS
DETALLES DE LA OFERTA
- ID del anuncio:
- A740-96-78
- N.º referencia:
- 000570
- Actualizado por última vez:
- el 29.01.2025
DESCRIPCIÓN
Fifth wheel height: 1200-1250 mm
Gooseneck cross-section: 185 mm
Gooseneck length: 3800 mm
Front overhang: 1200 mm
Front radius: 1560 mm
Free turning radius under gooseneck: 2350 mm
Gooseneck bevel: 750 mm x 14°
Gooseneck width: 2520 mm
Loading area
Riding height loaded (-/+ lift): 860 mm -70/+130 mm
Step to gooseneck: 550 mm
Loading area length: 9250 mm
Loading area bevel: 1150 mm x 5°
Loading area width: 2520 mm
Loading area widening up to max: 3020 mm
Axle spacing
King pin? first axle: 7190 mm
Rear wheelbase: 1360 mm
Rear overhang: 2340 mm
King pin ? Rear: 12250 mm
Ramps
Ramp angle: 4000 mm x 11°
Height in driving position: 3265 mm
Width when pushed together over ramps: 1770 mm
Width when extended over ramps: 2990 mm
Ramp width: 880 mm
Power supply
- Connections for brakes, lighting and EBS centrally on the front console.
- NATO connection cable in spiral flex design (spiral cable).
- NATO socket assembly kit for tractor is not included.
Front bulkhead / box
- Lockable steel tool box on the front of the gooseneck, divided into three compartments, with side doors and stainless steel lid on top. Color silver gray RAL 9006. SUITABLE FOR INSTALLATION OF A WINCH.
Cdmqalcsyo
Gooseneck options
- Spare wheel holder mounted on the front.
- A lashing eye on the back of the gooseneck for hooking the steel cable.
- 3 aluminum side walls on the gooseneck, height 400mm, all three approx. 2.3m long.
Loading area
- The loading area is beveled with 1150x100m (5°).
- Tubular central frame with practical cross members. This makes the semi-trailer very torsion-resistant and therefore very stable when loaded.
- In places where necessary, the cross members are reinforced to ensure that machines can pass safely.
- 6/8mm tear plate above the axles.
- Cross members 4cm deep.
- Cross members 4cm deep in bevel.
- Loading area above the tires reinforced for road milling machines up to max. Wirtgen 1000DC.
- Extendable widening brackets every approx. 1.40m to widen the loading area by 250mm per side.
Brakes
- 2-line Wabco EBS braking system, with automatic load-dependent brake force control (ALB), anti-lock braking system (ABS), and roll-over stability support (RSS).
- Parking brake via spring cylinder on several axles.
- ISO couplings for connecting the brakes
- A Duomatic connection mounted parallel to the ISO air connections.
Lighting
- Wiring is based on Hella EasyCon and complies with insulation standard IP69, suitable for ADR.
- 2 7-pin sockets (ISO-N and ISO-S) on the front console.
- White/red outline lights, orange side lights and license plate lighting in LED design.
- Rectangular LED tail lights. (According to EU directives, the truck must be able to monitor the trailer's (LED) direction indicators).
- 1 complete all-round light connection at the rear.
- Preparation for warning signs on the gooseneck and axle frame, consisting of holders and sockets.
- 4 adjustable red/white warning signs with protected mounted position lights in LED design.
- All-round light connections on the warning signs.
- Pair of additional holders for mounting warning signs in the existing stake pockets on top of the loading area.
- All-round light in LED design. (10W - 24V/0.4A - 12V/0.8A)
- Additional 2-pin socket mounted on the left ramp.
- Additional 2-pin socket mounted on the right ramp.
- 2 LED work lights
El anuncio se tradujo automáticamente y se pueden haber producido errores de traducción.
Gooseneck cross-section: 185 mm
Gooseneck length: 3800 mm
Front overhang: 1200 mm
Front radius: 1560 mm
Free turning radius under gooseneck: 2350 mm
Gooseneck bevel: 750 mm x 14°
Gooseneck width: 2520 mm
Loading area
Riding height loaded (-/+ lift): 860 mm -70/+130 mm
Step to gooseneck: 550 mm
Loading area length: 9250 mm
Loading area bevel: 1150 mm x 5°
Loading area width: 2520 mm
Loading area widening up to max: 3020 mm
Axle spacing
King pin? first axle: 7190 mm
Rear wheelbase: 1360 mm
Rear overhang: 2340 mm
King pin ? Rear: 12250 mm
Ramps
Ramp angle: 4000 mm x 11°
Height in driving position: 3265 mm
Width when pushed together over ramps: 1770 mm
Width when extended over ramps: 2990 mm
Ramp width: 880 mm
Power supply
- Connections for brakes, lighting and EBS centrally on the front console.
- NATO connection cable in spiral flex design (spiral cable).
- NATO socket assembly kit for tractor is not included.
Front bulkhead / box
- Lockable steel tool box on the front of the gooseneck, divided into three compartments, with side doors and stainless steel lid on top. Color silver gray RAL 9006. SUITABLE FOR INSTALLATION OF A WINCH.
Cdmqalcsyo
Gooseneck options
- Spare wheel holder mounted on the front.
- A lashing eye on the back of the gooseneck for hooking the steel cable.
- 3 aluminum side walls on the gooseneck, height 400mm, all three approx. 2.3m long.
Loading area
- The loading area is beveled with 1150x100m (5°).
- Tubular central frame with practical cross members. This makes the semi-trailer very torsion-resistant and therefore very stable when loaded.
- In places where necessary, the cross members are reinforced to ensure that machines can pass safely.
- 6/8mm tear plate above the axles.
- Cross members 4cm deep.
- Cross members 4cm deep in bevel.
- Loading area above the tires reinforced for road milling machines up to max. Wirtgen 1000DC.
- Extendable widening brackets every approx. 1.40m to widen the loading area by 250mm per side.
Brakes
- 2-line Wabco EBS braking system, with automatic load-dependent brake force control (ALB), anti-lock braking system (ABS), and roll-over stability support (RSS).
- Parking brake via spring cylinder on several axles.
- ISO couplings for connecting the brakes
- A Duomatic connection mounted parallel to the ISO air connections.
Lighting
- Wiring is based on Hella EasyCon and complies with insulation standard IP69, suitable for ADR.
- 2 7-pin sockets (ISO-N and ISO-S) on the front console.
- White/red outline lights, orange side lights and license plate lighting in LED design.
- Rectangular LED tail lights. (According to EU directives, the truck must be able to monitor the trailer's (LED) direction indicators).
- 1 complete all-round light connection at the rear.
- Preparation for warning signs on the gooseneck and axle frame, consisting of holders and sockets.
- 4 adjustable red/white warning signs with protected mounted position lights in LED design.
- All-round light connections on the warning signs.
- Pair of additional holders for mounting warning signs in the existing stake pockets on top of the loading area.
- All-round light in LED design. (10W - 24V/0.4A - 12V/0.8A)
- Additional 2-pin socket mounted on the left ramp.
- Additional 2-pin socket mounted on the right ramp.
- 2 LED work lights
El anuncio se tradujo automáticamente y se pueden haber producido errores de traducción.
PROVEEDOR
Persona de contacto: Sr. Stefan Goldschmidt
Alexander-Baumann-Str. 70
74078 Heilbronn, Alemania
+49 7131 ... mostrar
Registrado desde: 2008
Mostrar más
Mostrar más información legal
EBB Truck-Center GmbH
Alexander-Baumann-Str. 70
DE-74078 Heilbronn
Telefon: +497131/8983-0
Fax: +497131/8983-496
Handelsregister: HRB108616
Handelsregisternr.: Amtsgericht Stuttgart
Umsatzsteuer-Identifikationsnr. nach § 27a Umsatzsteuergesetz:
DE239643780
Vertretungsberechtigt: Reinhard Bayer, Armin Blum, Thorsten Dreher, Manuel Dreher, Claus Karsch
Alexander-Baumann-Str. 70
DE-74078 Heilbronn
Telefon: +497131/8983-0
Fax: +497131/8983-496
Handelsregister: HRB108616
Handelsregisternr.: Amtsgericht Stuttgart
Umsatzsteuer-Identifikationsnr. nach § 27a Umsatzsteuergesetz:
DE239643780
Vertretungsberechtigt: Reinhard Bayer, Armin Blum, Thorsten Dreher, Manuel Dreher, Claus Karsch
Cerrar más información jurídica
Mostrar menos
Enviar solicitud
TELÉFONO & FAX
+49 7131 ... mostrar
También puede estar interesado en estos anuncios.
Clasificado

1.371 km
Cargador bajo
Nooteboom3-axle semi-lowbed trailer OSDS-48-03V / ext. 15 m
Nooteboom3-axle semi-lowbed trailer OSDS-48-03V / ext. 15 m
Clasificado

1.466 km
Góndola de cama semirrebajada
NooteboomOSD-50-04-V EXTENDABLE SEMI DIEPLADER/TIEFLADER...
NooteboomOSD-50-04-V EXTENDABLE SEMI DIEPLADER/TIEFLADER...
Clasificado

1.433 km
Cargador bajo
NOOTEBOOMOSDS 46-03V
NOOTEBOOMOSDS 46-03V
Clasificado

1.433 km
Cargador bajo
NooteboomSemi 3asser lenkasche bladveer leaf spring
NooteboomSemi 3asser lenkasche bladveer leaf spring
Clasificado

1.404 km
Cargador bajo
NOOTEBOOMOSDS-48-03V(DM)
NOOTEBOOMOSDS-48-03V(DM)
Clasificado

1.371 km
Góndola de cama semirrebajada
Nooteboom4-axle semi-lowbed trailer 58 t ext.
Nooteboom4-axle semi-lowbed trailer 58 t ext.
Clasificado

1.403 km
Cargador bajo
NooteboomOSDS-58-04V / EXTENDABLE
NooteboomOSDS-58-04V / EXTENDABLE
Clasificado

1.466 km
Cargador bajo
NooteboomEURO-91-04 DIEPLADER/LOWLOADER/TIEFLADER
NooteboomEURO-91-04 DIEPLADER/LOWLOADER/TIEFLADER
Clasificado

1.433 km
Cargador bajo
NOOTEBOOMOSDS 46-03V 22M TOTAL LENGHT
NOOTEBOOMOSDS 46-03V 22M TOTAL LENGHT
Clasificado

1.371 km
Góndola de cama semirrebajada
Nooteboom4-axle semi-lowbed trailer OVB-65-04V ext. 43 m
Nooteboom4-axle semi-lowbed trailer OVB-65-04V ext. 43 m
Clasificado

1.371 km
Cargador bajo
Nooteboom5-axle semi-lowbed trailer MCO-85-05V / ext 13 m
Nooteboom5-axle semi-lowbed trailer MCO-85-05V / ext 13 m
Clasificado

1.371 km
Cargador bajo
Nooteboom3-axle lowbed trailer 41T OSDS 41-03
Nooteboom3-axle lowbed trailer 41T OSDS 41-03
Clasificado

1.371 km
Plataforma remolque
Nooteboom3-axle semi-lowbed trailer extendable 14.5 m + ...
Nooteboom3-axle semi-lowbed trailer extendable 14.5 m + ...
Clasificado

1.545 km
Góndola de cama semirrebajada
NooteboomMCO-58-04V, Extandable, Power Steering, Perfect !
NooteboomMCO-58-04V, Extandable, Power Steering, Perfect !
Clasificado

1.452 km
Góndola de cama semirrebajada
NooteboomOSD-39VV - 3 axle - Drum brakes -
NooteboomOSD-39VV - 3 axle - Drum brakes -
Clasificado

1.466 km
Góndola de cama semirrebajada
NooteboomMCO-121-08V 8 AXEL SEMIE LOWLOADER 1X EXTENDABLE
NooteboomMCO-121-08V 8 AXEL SEMIE LOWLOADER 1X EXTENDABLE
Clasificado

1.531 km
Góndola de cama semirrebajada
NooteboomMCO-74VV
NooteboomMCO-74VV
Clasificado

1.515 km
Semirremolque de plataforma baja
NOOTEBOOMEURO-48-03
NOOTEBOOMEURO-48-03
Clasificado

1.531 km
Góndola de cama semirrebajada
NooteboomMCO-92VV
NooteboomMCO-92VV
Clasificado

1.531 km
Góndola de cama semirrebajada
NooteboomMCO-109-07V(V)
NooteboomMCO-109-07V(V)
Clasificado

1.531 km
Góndola de cama semirrebajada
NooteboomMCO 50-04V
NooteboomMCO 50-04V
Clasificado

1.471 km
Góndola de cama semirrebajada
NooteboomMCO 48-03V/L
NooteboomMCO 48-03V/L
Clasificado

1.424 km
Góndola de cama semirrebajada
AndoverTieflader/Lowbed/Machine/250 with/total lengt l...
AndoverTieflader/Lowbed/Machine/250 with/total lengt l...
Clasificado

1.466 km
Góndola de cama semirrebajada
FaymonvilleF-S42-111A SEMI DIEPLADER/TIEFLADER/LOWLOADER
FaymonvilleF-S42-111A SEMI DIEPLADER/TIEFLADER/LOWLOADER
Clasificado

1.466 km
Góndola de cama semirrebajada
MeusburgerMPG-4 SEMI DIEPLADER/TIEFLADER/LOWLOADER/HUIF/P...
MeusburgerMPG-4 SEMI DIEPLADER/TIEFLADER/LOWLOADER/HUIF/P...
Su anuncio ha sido borrado con éxito
Se produjo un error