Camión grúa

Volvo FM 460 8x2R NLA

Volvo FM 460 8x2R NLA, Fhs. M with Junghanns platform body with ramps
Dimensions: Effective length approx. 9,400 mm
Loading height loaded approx. 1,030 mm

14 lashing eyes - tensile force 10,000 kg for load securing recessed in the outer frame
3 lashing eyes - tensile force 8,000 kg for load securing at the rear left/right/center
14 lashing rings - tensile force 8,000 kg for load securing in the area of the truck frame beams
approx. 190 pcs. Lashing holes on the outside and in the area of the side members - tensile force 2,500 kg for load securing
Load securing approx. every 150 mm, suitable for lashing strap
Outer frame with aluminum checker plate over the entire length as tread protection and scuff protection
Floor completely covered/screwed with non-slip hot-dip galvanized grating
Mesh end wall with side edging, height up to cab height,
Full-width lashing equipment support bar with flap for securing lashing straps
Tray shelf left/right next to cable winch, with rubber bumpers as impact protection, across entire width
4 lashing points - tensile force 10,000 kg - on the bulkhead, suitable for lashing strap up to 80 mm
2 LED work lights at the bottom - approx. 300 mm high behind the cut-out STW plate
2 drive-on ramps in 2 parts, approx. 4,350 mm long, approx. 850 mm wide, load capacity 20,000 daN
Ramps with anti-slip grating, hot-dip galvanized over the entire width, replaceable
Hydraulic ramp lifting device via truck auxiliary drive, can be operated separately,
Hydraulic folding of the ramps, can be operated separately
Hydraulic side ramp adjustment, can be operated separately
LED flasher mounted on the side of the ramp, protected
Ramp lock with lashing strap
Protective sleeves for lifting cylinder
Hydraulic cable winch approx. 6.3 t. Pulling force, with pneumatic freewheel and cable brake,
Winch mounted centrally in front of the bulkhead, with cable window, steel sheet cover
Hydraulic control valves mounted and protected in the plastic tool box,
Cover can be opened downwards, with LED lighting in the box,
1 hydraulic pump F1-41, oil tank approx. 60 liters
Motor start/stop mounted in protective box
Support hydraulically extendable, can be operated separately, support leg plate Ø 300 mm
with red indicator light in the cab and additional warning buzzer in the Fhs when outriggers are extended
Radio remote control for cable winch
Step to the loading area at the front left in the area of the bulkhead with handle
Step between the ramps at the rear
Position lights with rubber arm at the rear
2 LED work lights at the rear
Plastic toolboxes without LED interior lighting
2 mounted in the direction of travel on the left in front of the HA. approx.: W x H x D approx. 800/460/480 mm
Paint finish:
Brlcnfwelg
All steel parts hot-dip galvanized, unpainted
Attachment parts: black or galvanized
Contour marking white on the sides and red on the rear

El anuncio se tradujo automáticamente y se pueden haber producido errores de traducción.